Stop rekeying. Stop reformatting. Fire Inspect Hub formats your inspection data for Brycer submission the moment you finalize the job.
Last updated April 25, 2026 — Now supporting NFPA 17A kitchen suppression, JCAHO/DNV healthcare report formats, and AHJ-ready credentials.
You finish a full day of inspections in the field. The work is done. The findings are documented. But before you can call it a day, you have to open Brycer and start rekeying everything you just collected — address, system type, inspection result, deficiencies, technician name — line by line.
It takes time you do not have. And every manual entry is a chance for a mistake that comes back to haunt you at the worst possible moment.
There is nothing wrong with Brycer. It is the compliance engine your AHJ requires. The problem is the gap between your inspection software and Brycer's upload fields. Most inspection tools leave you to bridge that gap yourself.
Fire Inspect Hub was built to close it.
Three steps from inspection to Brycer submission — no rekeying anywhere in the process.
Your inspector works through NFPA-referenced checklists on any device. Assets, findings, deficiencies, photos, and observations — all captured in one place.
When the inspection is complete, one tap finalizes the job. A professional PDF report generates automatically — ready for the client the same day. No office cleanup required.
Fire Inspect Hub formats your inspection data to match Brycer's required fields. Copy and paste directly into Brycer — no rekeying, no reformatting, no guessing which field goes where.
Every feature in Fire Inspect Hub is designed around the real workflow of a fire protection contractor.
Every checklist item references the applicable NFPA standard — NFPA 10, 25, 72, and 17A. Your inspection documentation is compliant before it ever reaches Brycer.
The Brycer Assistant organizes your inspection results into the fields Brycer expects. Copy. Paste. Submit. Done.
Hospitals and healthcare facilities don't just need Brycer submission — they need Joint Commission EC.02.03.05 and DNV NIAHO format reports. Fire Inspect Hub generates both alongside the Brycer submission, from the same inspection data.
NICET levels (Fire Alarm and Water-Based), state license jurisdiction, and license number render on every inspection report — and travel with your Brycer submission. Surveyor question answered before it's asked.
Client-ready PDF reports generate automatically when you finalize an inspection. Professional, branded, and ready to send — no reformatting required.
Internal notes your inspector captures in the field stay visible to your team but never appear on the client-facing report or the Brycer submission.
NFPA standards change. AHJ requirements vary by jurisdiction. Fire Inspect Hub adds and updates checklists upon request — no backlog, no waiting, no roadmap committee.
Every asset is tracked by floor and location. As each asset is inspected it drops off the list — your inspector always knows exactly what's left to do.
Fire Inspect Hub is purpose-built for fire protection contractors who run NFPA 10, 25, 72, and 17A inspections and submit compliance reports through Brycer.
If your team is currently using paper forms, Excel spreadsheets, or inspection software that was not built specifically for fire protection — and you are spending hours bridging the gap between your documentation and Brycer — Fire Inspect Hub was built for you.
Fire Inspect Hub supports NFPA 10, 25, 72, and 17A inspections from a single platform — all formatted for Brycer submission.
No setup fees. No long-term contracts. No sales call required to understand what it costs.
Start for free. No credit card required. See how the Brycer Assistant works in your first session.