Fire Inspect Hub is inspection checklist software built specifically for portable fire extinguisher inspections under NFPA 10. Every checklist item references the applicable code section. Every completed inspection generates a professional PDF report — ready for the client the same day.
Now supporting NFPA 17A kitchen suppression, AHJ-ready credentials on every report, and AI-assisted report polishing.
No credit card required
For most fire protection contractors, portable fire extinguisher inspections are the highest volume work on the books. A single technician might inspect dozens of extinguishers in a day across multiple buildings — tagging, checking pressure, documenting condition, recording hydrostatic test dates, and submitting to Brycer before the end of the shift.
When your documentation tool wasn't built for this workflow, the time your inspector spends in the field is only half the job. The other half happens back at the office — reformatting notes, fixing reports, rekeying data into Brycer, and chasing down information that should have been captured on site.
Your inspector opens their assigned job on any device. Assets are pre-loaded — each extinguisher with its type, location, and service history already on file. No setup on site. Just open and inspect.
Every checklist item references the applicable NFPA 10 section and edition year. Pass, flag a non-critical deficiency, mark a critical deficiency, or escalate to impairment — the four compliance levels your AHJ and insurance company expect to see.
Photograph deficiencies directly in the app. Add internal observation notes that stay visible to your team but never appear on the client-facing report. Field intelligence stays where it belongs.
One tap finalizes the inspection. A professional PDF report generates automatically — branded, code-referenced, and ready for the client the same day. No office cleanup. No reformatting.
Open the Brycer assistant. Your inspection data is formatted and ready to copy-paste directly into Brycer. No rekeying. No missed fields. No return trips because something was entered wrong.
Every checklist item displays the applicable NFPA 10 section number and edition year. Your inspector knows exactly what standard they are inspecting against — and so does the AHJ who reviews the report.
Pass. Non-Critical Deficiency. Critical Deficiency. Impairment. Industry-standard terminology that your reports, your clients, and your AHJs all recognize.
Track every extinguisher by type, location, serial number, hydrostatic test date, and service history. Pre-load assets before the inspection so your technician arrives prepared.
Capture internal field notes that never appear on the client report. When your technician notices something worth flagging for the next visit — but it's not a formal deficiency — this is where it lives.
Client-ready PDF reports generated automatically at inspection completion. Professional, branded, and formatted to hold up under AHJ and insurance scrutiny.
Your NFPA 10 inspection data formatted for Brycer submission. Copy, paste, submit. No rekeying at the end of a long day in the field.
NICET levels (Fire Alarm and Water-Based), state license jurisdiction, and license number render under the inspector's signature on every NFPA 10 report. Built in response to real AHJ requirements — your inspector's qualifications travel with every document.
Type rough field notes describing a deficiency. The AI assistant polishes them into clean, professional report language before you finalize. Spend less time at the keyboard. More time in the field.
NFPA 10 editions change. AHJ requirements vary by jurisdiction. If your checklist needs to reflect a specific edition or local requirement — we update it. No backlog. No waiting.
The extinguisher meets the applicable NFPA 10 requirement. No action required.
A deficiency exists but does not have an immediate adverse effect on system performance. Attention needed — not urgent.
A deficiency that has an adverse effect on system performance and requires immediate attention.
Full-stop escalation. The extinguisher or system is out of service. Roll the trucks. Notify the building owner and AHJ immediately.
The inspector always determines the compliance level. Fire Inspect Hub provides the framework — the professional judgment belongs to the inspector.
Fire Inspect Hub is purpose-built for independent fire protection contractors and inspection teams who run portable fire extinguisher inspections under NFPA 10. If your team is currently using paper forms, Excel spreadsheets, or inspection software that wasn't built for fire protection — and you're spending time after every inspection fixing reports and rekeying data into Brycer — Fire Inspect Hub was built for you.
Month-to-month. No contract. Cancel anytime.
Start For FreeLarger teams or multiple locations? Let's build you a quote.
Let's talkFire Inspect Hub supports NFPA 10, 25, 72, and 17A inspections from a single platform. Your team uses one login, one workflow, and one report format — regardless of which standard applies to the job. Need a standard we don't currently support? We add checklists upon request.
Start for free. No credit card required. Run a complete NFPA 10 inspection in your first session and see exactly how it works for your team.
No credit card required